| Customization: | Available |
|---|---|
| Material: | Pure Zirconium |
| Refractoriness (℃): | Refractoriness> 2000 |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
At present, zirconia fiber is the only lightweight refractory fiber material that can meet the long-term use of high temperature oxidation atmosphere above 1500ºC. It exists in the form of loose cotton. Zirconia fiber board is processed from zirconia fiber loose cotton.
Redon zirconia fiber products are tetragonal/cubic/monoclinic polycrystalline refractory fiber materials made of yttrium stabilized zirconia, with a melting point of more than 2700ºC. The product after ultra-high temperature sintering, 1800ºC dimensional stability is good, can be used in 2200ºC high temperature environment.
Redon zirconia fiber board has different density of multi-specification products, with different strength and thermal conductivity, can be used in high temperature oxidation atmosphere, high temperature vacuum or other atmosphere will have discoloration phenomenon, does not affect the insulation effect.
Redon zirconia fiber board can provide customized processing services for customers.
| Characteristic |
2. Energy saving: Compared with alumina fiber materials widely used in the current market, this product can save up to 30% (1700ºC), and the higher the application temperature, the more significant the energy saving effect. 3. Shrinkage: the shrinkage rate is less than 0.15% (density 0.5g/cm3, 1800ºC) in the application temperature range. 4. No volatilization: no binder or combustion aid is added, the introduction of impurities is avoided, and there is no continuous release of organic matter or other ions in the application stage. 5. Long life: the product has the characteristics of high strength and low shrinkage above 1700ºC (the alumina fiber has been close to the softening temperature, the strength decreases and the shrinkage becomes large), and the life is 2 times that of the alumina fiber material. |
| Application |
All kinds of high temperature electric furnace, crystal growth furnace, microwave sintering furnace and other hot field insulation
High temperature thermal protection materials can not only replace or reduce traditional refractories, but also greatly improve the effect of heat insulation and energy saving |
| Product type | RDGW-934 | RDGW-935 | |
| volume density (g/cm3) | 0.5 | 1.0 | |
| gas hole ratio(%) | ~91 | ~83 | |
| compressive strength (Mpa) | 0.3 | 1.6 | |
|
coefficient of thermal expansion
(Perpendicular to the direction of thickness,Room temperature to 1350ºC ,ºC) |
10.2×10-6 | 10.2×10-6 | |
| Linear Mold Shrinkage(%) | 1hx1750ºC | 0.4 | 0.1 |
| 24hx1750ºC | 1.0 | 0.8 | |
| heat conductivity coefficient (Parallel to the thickness direction ,W/m.K) |
400ºC | 0.051 | 0.056 |
| 600ºC | 0.055 | 0.068 | |
| 800ºC | 0.067 | 0.081 | |
| 1000ºC | 0.076 | 0.090 | |
| 1200ºC | 0.086 | 0.095 | |
| 1400ºC | 0.099 | 0.110 | |
| stock size (mm) | 600x900x(20~50) | 600x900x(20~50) | |
| Products of different sizes and densities can be produced according to customer requirements. | |||
Q1 : What's the MOQ. Can I get a sample of free?
A1: MOQ, according to the actual situation. We can offer a sample of free. Please, friendly bear the shipping cost.
Q2 : When can i get the quotation?
A2: We can give you reply with quotation quickly if you kindly send the inquiry with following factors: working temperature, maximum working temperature, bulk density, dimension (length*width*thickness), and quantity.
Q3 :What's the MOQ of trial order?
A3: No limit, we can offer the best suggestions and solutions according to your condition
Q4 : What is the HS code?
A4: The HS code is 68061010.
Welcome your inquiry and expect to provide satisfactory products and services for you.
){kind=link}